Pentair FLECK 2910 NXT - Flow Meter Selection

Installer Manual Fleck 2910 - NXT - Programming
Ref. MKT-IM-002 / B - 23.05.2018 71 / 114
6.5.20. Flow meter selection
Select the size of the flow meter.
Options:
• 1" paddle;
•1" turbine;
• 1½" paddle;
•1½" turbine:
• 2" paddle (standard for 2910 valve);
• 3" paddle;
•generic meter.
6.5.20.1 Generic meter
Note
Only visible if "generic" was selected in flow meter selection.
Set the generic meter.
Note
This parameter has two settings. The first one determines the volume which activates the
relay. The second one determines how long the relay has to be activated.
BE Select the flow meter with and .
BF Press to validate the selection and advance to the next
parameter.
FLOW METER 
2.0"PADDLE
BG Set the maximum flow rate with , and .
BH Press to validate the selection and advance to the next
parameter.
BI Set the number of litres per pulse with , and .
BJ Press to validate the selection and advance to the next
parameter.
Example: 290 L/min.
PEAK FLOW 
0290 lpm
Example: 1 litre for 1 pulse.
ADD 001 LITERS
EVERY 001 PULSES
Example: 5 litres for 1 pulse.
ADD 005 LITERS
EVERY 001 PULSES
Example: 2 litres for 10
pulses.
ADD 002 LITERS
EVERY 010 PULSES