10
11
IntelliSync Control and Monitoring System User's Guide
Pump Speed Settings (Manual)
∙ Manual Pump Speed Settings: To
congure each of the four pump speeds,
tap Manual, then position the slide bar
under Speed 1. Use the slide bar to set
the speed (RPM) for Speed 1. Repeat for
each Speed (1-4). Tap Save.
When nished setting up the pumps
manual speeds, timer and schedule, tap
Save to display the Connected Devices,
or tap Home to display the Dashboard.
Tap the Return arrow to display the Add
Devices page. See page 8.
Pump Settings (Timer)
∙ Mode [Timer]: Slide the Speed slide bar to
Speed 1, then tap Timer.
Set New Timer: Selected pump can be set
to run up to 9 hrs. 59 mins. The one time
count down egg timer will stop after the
Timer has reached it's stop time.
Tap SAVE to save the pump speed settings.
Pump Settings (Schedule)
∙ Schedule: Tap Schedule to set a schedule for the each of the
pumps.
Set New Schedule: Use the slide bar to select each of the
pump Speeds.
Select Time: Set the Start and End time (Hours/Minutes) for
the selected pump speed.
When nished tap ADD TO SCHEDULE. Repeat the schedule
time for each pump speed.
To Next Page
Loading...
Need help?
General
