12
13
IntelliSync Control and Monitoring System User's Guide
Pump Speed Settings (SuperFlo/Pro® VS)
To access the SuperFlo/Pro VS pump settings page, from the Dashboard, tap
the pump name. Tap the Settings icon (top right) to display the pump's
features and other information. See page 17.
The pump speeds (RPM) are assigned on the pump's control pad:
∙ Tap on Speed 1, 2 , or 3 , then assign
the pump Mode (Manual, Timer and
Schedule). Repeat for each of
the pump speeds (1-3). Note: SuperFlo
VS and SuperMax VS Pump Speed
Priority: The lowest speed (RPM)
assigned on the pump will always take
priority over the highest speed.
Turn the pump ON or OFF (Enable):
Status (OFF/ENABLED - ON): Tap
Speed (1, 2, or 3), then tap the Status
button (Enabled) to turn the pump
ON or OFF. OFF: Turn pump OFF.
ENABLED (ON): Turn pump on.
Status Stopped: Pump has stopped. Indicates the
pump is set to Schedule mode. The pump will turn on at the next sched-
uled time, after the current
Schedule has nished.
Power Usage: Displays the current power usage in Watts for the selected
pump.
MODE (Manual - Timer - Schedule):
∙ Manual: Tap on Speed 1, then tap Manual. The pump is in
manual mode. Use Status (Enabled (On) /Off) to turn the pump
on or off. Tap Home to save the setting and return to the
Dashboard.
∙ Timer: Selected pump can be set to run up to ten (10) hours
maximum (from 23 Hrs. 59 mins). The one time count down
egg timer will stop after the Timer has reached it's stop time.
Tap Home to save the setting and return to the Dashboard.
∙ Schedule: Tap on Speed 1, then tap Schedule. Tap the Start
time and End time to run the schedule, then tap Add to
Schedule to save the schedule. Tap Home to save the setting
and return to the Dashboard.
To Next Page
Loading...
Need help?
General
