6
7
IntelliSync Control and Monitoring System User's Guide
1. Dashboard: After login: Tap
Add a Device (water drop icon)
then tap IntelliSync Control
and Monitor System to add this
device to your mobile device.
2. IntelliSync unit: Slide the
control pad cover upward.
Press and hold the MODE
button for 3-seconds until
the CONNECTION LED starts
to blink. The unit is ready for
Bluetooth Paring.
4. Turn on Bluetooth on your
mobile device: On the Add a
Device page, tap IntelliSync.
The Installation (IntelliSync)
page displays. Tap CONTINUE.
Bluetooth Paring page displays.
5. Tap CONTINUE. SCANNING...
is displayed. Tap PNRXXXXXX
Connecting your Mobile Device
to your home network
6. Connect Your Device to WiFi: Tap on
the name of your home network and
enter the password. Tap CONTINUE to
connect to your home network. WiFi
Data Sent is displayed.
Dashboard
Enter your home network password,
then tap CONNECT. Installation
Completed displays. Tap CONTINUE.
The prole page displays. Tap the
location of your pool then tap SAVE.
7. Tap CONTINUE when “Installation Completed” is displayed.
The IntelliSync Control and Monitoring System prole and
location page is displayed. IntelliSync: Select the street
Address where your IntelliSync Control and Monitoring
System is located. You can also add another location on
the displayed map. MY DEVICES page displays. Continue
to Add a Device.
∙ The MY DEVICES page displays. Continue to page
8 to Add a Device.
To Next Page
Loading...
Need help?
General
