219
8
Connecting to a Computer
5
Use the four-way controller (23)
to select [MSC].
6
Press the 4 button.
The setting is saved.
7
Press the 3 button.
The camera returns to A mode or Q mode.
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the
computer via USB as a memory device. Also indicates a standard for
controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class,
you can copy, read, and write files from a computer without installing a
dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital
cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without
installing a device driver.
Unless otherwise specified, select MSC when connecting the Optio
WS80 to your computer.
Proceed to the following pages depending on your computer.
Connecting to a Windows PC 1 p.220
Connecting to a Macintosh 1 p.229
MSC and PTP
Setting
Power Saving
Auto Power Off
Reset
3min.
5sec.
Video Out
Brightness Level
2/3
MENU
Cancel
OK
OK
USB Connection
MSC
PTP
To Next Page
Loading...
