169
7
Connecting to a Computer
Connect the camera to a computer using the provided USB cable.
1
Turn the computer on.
2
Turn the camera off.
3
Connect the camera to the computer using the USB cable.
The power lamp blinks when the camera is connected to the computer correctly.
4
Turn your camera on.
The power lamp stops blinking and remains lit when the camera is recognized
as a removable disk by the computer.
If the “WG-90” dialog appears when the camera is turned on, select [Open folder
to view files] and click the 4 button.
5
Save the captured images to the computer.
Connecting the Camera and a Computer
For information on system requirements, refer to p.170.
e_kb635_EN.book Page 169 Thursday, November 9, 2023 9:17 AM
To Next Page
Loading...
