95
3
Taking Pictures
You can give an image sharp or soft outlines.
1
Use the four-way controller (23) to select [Sharpness] in the
[A Rec. Mode] menu.
2
Use the four-way controller (45) to change the sharpness level.
F Soft
G Normal
H Sharp
You can set either color brightness (Saturation) or the tone of monochrome
images (Tone Adjustment).
The menu item to be displayed changes depending on the [Image Tone] selected
in the [A Rec. Mode] menu.
1
Use the four-way controller (23) to select [Saturation (or
Tone Adjustment)] in the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select the level of
saturation (or color tone for Tone Adjustment).
F Low (Blue for Tone Adjustment)
G Normal (B&W for Tone Adjustment)
H High (Sepia for Tone Adjustment)
For setting the image contrast level.
1
Use the four-way controller (23) to select [Contrast] in the
[A Rec. Mode] menu.
2
Use the four-way controller (45) to change the contrast level.
F Low
G Normal
H High
Setting the Image Sharpness (Sharpness)
Setting the Saturation/Tone Adjustment
Selected Image Tone Displayed item
Bright, Natural, Vibrant, Slide Film
*
Saturation
Monochrome Tone Adjustment
* cannot select the level (fixed to Normal)
Setting the Image Contrast (Contrast)
e_kb635_EN.book Page 95 Thursday, November 9, 2023 9:17 AM
To Next Page
Loading...
