78
3
Taking Pictures
The camera automatically emits the focus assist light in dark shooting situations.
You can set the light to on or off.
1
Use the four-way controller (23) to select [AF Setting] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
The [AF Setting] screen appears.
3
Use the four-way controller (23) to select [Focus Assist].
4
Use the four-way controller (45) to select O (On)/P (Off).
The setting is saved.
For setting the tone of images.
You can select from [Bright], [Natural], [Vibrant], [Slide Film], [Monochrome], or
[Cross Processing].
The default setting is [Bright].
1
Use the four-way controller (23) to select [Image Tone] in the
[A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select a finishing tone.
4
Press the 4 button.
The setting is saved.
Setting the = Assist Light (Focus Assist)
Looking at the light directly will not create a safety hazard. However, do not
look into the emitter from a very short distance since you may feel dazzled.
The camera does not emit the focus assist light depending on the selected
shooting mode or focus mode. Refer to “Functions Available for Each
Shooting Mode” (p.172) for details.
Setting the Image Tone
e_kb635_EN.book Page 78 Thursday, November 9, 2023 9:17 AM