96
3
Taking Pictures
You can choose whether to imprint the date and/or time when taking still pictures.
1
Use the four-way controller (23) to select [Date Imprint] on
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the Date Imprint
details.
Choose from [Date], [Date & Time], [Time] or [Off].
4
Press the 4 button.
The setting is saved.
You can take pictures with clearer details by using image processing with the IQ
Enhancer technique.
1
Use the four-way controller (23) to select [IQ Enhancer] in
the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select O (On)/P (Off).
O (On) The IQ Enhancer function works
P (Off) The IQ Enhancer function does not work
The setting is saved.
Setting the Date Imprint Function
• The date and/or time imprinted with the Date Imprint function cannot be
deleted.
• Note that if a printer or image editing software is set to print the date and
the images to be printed already have the date and/or time imprinted, the
imprinted dates and/or times may overlap.
• O
appears on the display in
A
mode when [Date Imprint] is set to any
setting other than [Off].
• The date and/or time are imprinted on the picture with the display format
set in the [Date Adjustment] screen (p.41).
Setting the IQ Enhancer Processing
IQ Enhancer does not function in the following situations:
• When the drive mode is set to c (Burst Shooting)
• When the shooting mode is set to c (Digital SR)
e_kb635_EN.book Page 96 Thursday, November 9, 2023 9:17 AM
To Next Page
Loading...
Need help?
General
