Pentax SF1 - Page 29

3. To determine the aperture first
Slide the select switch to the UP or DOWN position
until only one solidly lit indicator remains in the
viewfinder. If the correct exposure cannot be obtained
in this way, reset the aperture.
Metered Manual Mode Warnings
When the subject is too bright or too dark, the viewfinder
indicators blink to warn you. Turn the aperture ring
either to a smaller f-number (toward f/1 -4, etc.) or to
a larger f-number (toward f/22, etc.) until the indicators
stop blinking. When the selected shutter speed is 1/30
second or slower (shown by the orange indicators in
the viewfinder, the use of a flash or tripod is recommend*
ed to avoid camera shake. (See page 26 for more detailed
information on warnings.)
25 •