Pentax SF1 - Strap and Case

STRAP AND CASE
1. To attach the strap to the camera, first pass Its end
through the camera's strap lug, then fold it backwards.
Next, pass it through the strap ring and the strap
clasp, in that order. The end of the strap may be
passed through the inside or outside of the clasp.
2. The soft case consists of a front and a back cover,
which are connected by hooks.
3. Open up the front cover, and place the camera in
the back cover. The camera is firmly secured in the
case by hooking up the back cover's hook with
the front cover's fitting.
• A soft case is available as an option, and consists of
a back cover and two differnt front covers (small and
large).
Small front cover: for a camera with a standard lens
(such as the Zoom 35mm—70mm).
Large front cover: for a camera with a telephoto zoom
lens (such as the Zoom 70mm—210mm).
• A back cover for a camera equipped with an accessory
data back is also available as an option.
57#