Pentax SF1 - Inserting Battery

PREPARATIONS
INSERTING BATTERY
This camera comes equipped with the
standard Lithium Battery Grip. For this grip,
use one 6V lithium battery (National/
Panasonic BR-P2 d p , Duracell DL-223A,
Eveready EL2CR5 or Sanyo 2CR5).
1. Remove the grip by turning its mounting screw
counterclockwise with a coin.
2. Position the lithium battery properly by matching its
polarity marks (''+"and with those inside the
grip, then mount the grip at the original position.
(The old battery can easily be removed by pulling
the band.)
^ Insert BR-P2 d p and DL-223A within the inner frame
of the battery chamber as shown above.
npp
• When you change
batteries, the CENTIC
(Central Information
Cluster) LCD display
panel will be activated,
and all its indicators and
the flash-ready indicator
of the RTF will light up.
(Lithium Battery Grip)