Pentax SF1 - Page 67

Self-timer:
Mirror:
Film advance/
rewind:
Exposure control:
Exposure
compensation:
Exposure-
memory lock:
Built-in flash:
Flash sync:
Power source:
Low battery
warning:
Back cover:
Dimensions/
weight:
Standard
accessories:
Electronically-controlled type. 12-sec. delay time. Start by shutter release button. Operation
confirmation by LED indicator, PCV sound and CEIMTIC panel. Cancellation by exposure-mode-clear
button or main switch off.
Swing-up-type instant-return mirror with AF secondary mirror.
Auto wind / rewind and auto rewind stop by built-in wind motor. Consecutive or single advance mode.
Approx. 1.8-frame-per-second advance speed.
TTL center-weighted, averaged-area metering by GPD cell. Metering range from EV 1 to EV 20 at ISO
100 with 50mm f/1.4 lens.
EV -4 to EV 4 in 1/2 steps.
By exposure-memory-lock (ML) button.
Parallel-controlled retractable TTL Auto Flash (RTF) with AF Spotbeam Projector. Guide number: 14
(ISO 100 in meters). Covers angle of view for 35mm wide-angle lens.
Via hot shoe with X-contact which couples with Pentax dedicated auto flashes.
One 6V lithium battery pack for standard Lithium Battery Grip, or four 1,5V AA-size alkaline
batteries for optional AA-size Battery Grip.
By blinking battery warning mark in CENTIC panel and blinking viewfinder LED under standard voltage
supply.
Interchangeable for accepting Data Back F or Interval Data Back F,
157{W) X 99(H) X 63.5(D)mm (6.1 x 3.9 x 2.5 in.). 665 grams (23.3 oz> without batteries.
Hot-shoe cover. Release-socket cap F, Eyecup F, Body-mount cover F, and Camera strap F.
63 •