6
Distance Offset Measurement, Plane
Offset Measurement, and Column
Offset Measurement.
Besides, basic measurement is also
used for performance testing for total
station.
1.3.2 STD Measurement(Optional)
Function introduction Display
STD measurement function is used to
resolve and calculate applied
measurements during conventional
surveying. It contains “project
management”, “import/export”,
“instrument station setup and
orientation”, “foresight
measurement”, “backsight
measurement”, “side-looking
measurement”, “cross-sectional
measurement”, “setting out of point,
bunch and alignment”, “road
design”, “traverse adjustment”,
“coordinate geometry”, “ batter board
label”, “steel ruler connection survey”,
“data query and editing” and so on.
NOTE: This part is optional, it is normal
to display as right figure.
To Next Page
Loading...
Need help?
General
