Pentax W-1502N Series - Main Menu; Basic Measurement

5
1.3 Main menu
Function introduction Display
After initiating the instrument the
screen will go to present “Welcome
Interface” which is shown right.
PENTAX Survey consists of several
functions, that is, “BSC Measure
（
Basic
Measurement
）
”, “STD Measure
（
Standard Measurement
）
”,
“Engineering Surveying
（
FieldGenius
）
”,
“INST Setup
（
Instrument Setup
）
”and
“About
（
Relevant Information
）
”.
1.3.1 Basic Measurement
Function introduction Display
Click “BSC Measure” key to activate
basic measuring. This function is used
for simple measuring and calculating,
including angle measurement, distance
measurement, coordinate
measurement and parameter setting.
Distance measurement mode
underpins Remote Elevation
Measurement and Line-height
Measurement. Coordinate
measurement mode includes Traverse
Surveying, Angle Offset Measurement,