EasyManuals Logo

Pentax W-1502N Series User Manual

Pentax W-1502N Series
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
12
3) Push one battery case towards lower one box into the end,,
clockwise turn the round battery clamp 90°to mount the lower battery
case
1.6.3 Recharge battery
1)With battery power contactors touch with charger contactor, put battery into
charger case by bayonet lock
2)Plug the charger on 100V/240V power supply.The red lamp becomes
lighting,which indicates recharging.If interval-time is longer,the connector isn’t
fixed well.
3) That the green lamp flashes means recharging is complete.
NOTE: 1) New battery (or battery does not used for several months) should be
recharged for several times.Please recharge it more than 10 hours,
and then the battery can attain best status.
2) Please recharge the battery continuously for another 1~2 hours after
the light green,which is good for the battery.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pentax W-1502N Series and is the answer not in the manual?

Pentax W-1502N Series Specifications

General IconGeneral
BrandPentax
ModelW-1502N Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals