Pentax W-1502N Series User Manual

54
4.5 Coordinate Measurement Mode
4.5.1 Setting coordinate of occupied point
After input coordinate of occupied point(instrument location), unknown
point coordinate will be measured and displayed with this program.
Operation steps Keys Display
①
Click “M.Coor” key to
enter coordinate
measurement mode.
【
M.Coor
】
②
Click “OCC PT” key.
【
OCC PT
】

Pentax W-1502N Series Specifications

General

Brand	Pentax
Model	W-1502N Series
Category	Measuring Instruments
Language	English