Pentax W-1502N Series User Manual

38
①
Collimate the centre
of prism.
Collimate
prism
②Click “Mode” key to
activate setting
function of distance
measurement
mode.And this mode is
set as “Track”.
【Mode】
③
Click “Enter”
key,collimate the
centre of prism,and the
system will carry out
measurement based on
previous setting.
【
Enter
】
4.4.4 Exchange of distance units
Change distance unit on the screen of distance observation.
Operation steps Keys Display

Pentax W-1502N Series Specifications

General

Brand	Pentax
Model	W-1502N Series
Category	Measuring Instruments
Language	English