39
①
Click “m/ft” key.
【
m/ft
】
②Changed distance unit
will display in the upper
right corner. ※1
※
1 Distance unit will be exchanged among meter,american feet and
international feet every time you click “m/ft” key.
4.4.5 Distance stake out measurement
This function can display the difference between measured distance and
preset distance.
Displayed Value=Observed Value – Standard(Preset) Distance
Setting out among all sorts of distance measurement modes(such as slope
distance, horizontal distance and elevation difference) can be carried on.
Operation steps Keys Display
To Next Page
Loading...
Need help?
General
