Pepperl+Fuchs 6000 SERIES - 6000 Series component kit; Identification of components; EPV-6000 vent: required for 6000 control unit; component kit; 6000 series component kit accessories

17
6000 Series Purge/Pressurization System
I/O Manual
6000 Series component kit
Identication of components
The EPV-6000 vent is required.
The reference kit comes with the EPV-6000-SS
vent but must be ordered when mounting the
EPV-6000-AA vent inside the enclosure.
Attention
Attention
Cannot be mounted in a
hazardous dust environment.
6000-ISB-01 (Not Included)
DIN-mounted I.S. termination board.
See data sheet for specications
6000 series component kit accessories
EPV-6000 vent: required for 6000 control unit / component kit
User interface (Included)
EPV-6000
Control unit and explosion-proof/
ameproof enclosure (Included)
Optional pneumatic manifold
with solenoid (Included)
Atmospheric reference kit (6000-ACC-514482)
for mounting vent inside the enclosure
6000-CBLA-ISB-xxxt (Not Included)
Cable assembly for connection from the
6000 EPCU to the 6000-ISB-01. See
data sheet for specic lengths.
6000-DPE-01-xxx (Not Included)
Dust-proof enclosure to house the
6000-ISB-01 and 6000-TEMP-01 devices