Pepperl+Fuchs 6000 SERIES - Password; Language; Bypass control; Restore defaults

36
6000 Series Purge/Pressurization System
I/O Manual
— PRESS AS
INPUT
— PRESS FUNCTION — SETTING CORRECT
Y/N
— PRESS FUNCTION — DISABLED — SETTING CORRECT
Y/N
— CONTROL OUTPUT
1
— SETTING CORRECT
Y/N
— CONTROL OUTPUT
2
— SETTING CORRECT
Y/N
— CONTROL VALVE — SETTING CORRECT
Y/N
— ON PRESSURE — ON PRESSURE
XX.X IN WC — SETTING CORRECT
Y/N
— OFF PRESSURE — OFF PRESSURE
XX.X IN WC — SETTING CORRECT
Y/N
— TEMP INPUT — SENSOR SETUP — EXT SENSOR
COUNT
— XX — SETTING CORRECT Y/N
— USE HUB SENSOR — HUB YES, NO — SETTING CORRECT Y/N
— TEMP INPUT 1 — TEMP FUNCTION — DISABLED — SETTING CORRECT Y/N
— TEMP FUNCTION — IMMEDIATE SHTDN — SETTING CORRECT Y/N
— DOOR OPEN ALARM — SETTING CORRECT Y/N
— OVERLOAD — SETTING CORRECT Y/N
— CONTROL PWR
RELAY
— SETTING CORRECT Y/N
— CONTROL OUTPUT 1 — SETTING CORRECT Y/N
— CONTROL OUTPUT 2 — SETTING CORRECT Y/N
— CONTROL VALVE — SETTING CORRECT Y/N
— ALARM — SETTING CORRECT Y/N
— SETPOINT TYPE — *AVERAGE SINGLE
PT
— ON SET POINT — XX °F
— OFF SET POINT — XX °F