Pepperl+Fuchs IC-KP-B17-AIDA1

To Next Page

To Previous Page

IC-KP-B17-AIDA1

5.4 Device connection..............................................................................17

5.4.1 Power supply.................................................................................... 17

5.4.2 Read/Write Head and Trigger Sensors............................................. 17

5.4.3 Cable length between control interface and R/W heads................... 17

5.4.4 Ground connection........................................................................... 17

5.4.5 Ethernet connection guide ...............................................................18

6 Commissioning......................................................................... 20

6.1 Preliminary considerations ...............................................................20

6.2 Connection..........................................................................................20

6.3 Device settings ...................................................................................21

6.4 Operating the device..........................................................................22

6.5 Setting the IP address........................................................................23

6.5.1 Using the identification system without a DHCP server .................... 24

6.5.2 Using the identification system with a DHCP server ......................... 24

7 Commands ................................................................................ 25

7.1 Data Exchange....................................................................................25

7.2 Communication via TCP/IP................................................................26

7.2.1 General information on data communication via TCP/IP ................... 26

7.2.2 Command examples TCP / IP ..........................................................27

7.3 Communication via MODBUS TCP/IP...............................................29

7.3.1 General Information on Data Communication via MODBUS/TCP .....29

7.3.2 Overview of the characteristics of the integrated MODBUS slave .... 29

7.3.3 Supported MODBUS commands .....................................................33

7.3.4 General notes on creating the control program .................................39

7.3.5 MODBUS exception codes ..............................................................40

Pepperl+Fuchs IC-KP-B17-AIDA1 - Page 4