2014-02
96
IC-KP-B17-AIDA1
Web features
8 Web features
8.1 Configuring the identification system via web feature
The identification system can also be configured using http. In order to activate the device via
the network, the IP address and the subnet mask must be configured via the display as a
minimum requirement (if no DHCP is used).
Websites can be viewed using an internet browser.
The following functions are supported:
■
Network settings (network)
■
Email function settings (email)
■
Security settings (security)
■
Exchanging identification data (send command)
■
Short documentation (documentation)
8.2 Network settings
The following settings can be configured on this page:
■
DHCP activation
■
IP address
■
Subnet mask
■
Gateway address
■
PROFINET devicename
To Next Page
Loading...