Pepperl+Fuchs IC-KP-B17-AIDA1 - Page 45

IC-KP-B17-AIDA1
Commands
2014-02
45
Example: Assembly instance 104, single read command
Configure output instance 104d first via the display.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
N14:0 <WordNum> <T> <command>
N14:1 <WordAddr> (low byte) <WordAddr>(high byte)
N14:2 Write data DW 1 (if not used, please set to 0)
N14:3 Write data DW 1 (if not used, please set to 0)
N14:4 <WordNum> <T> <command>
N14:5 <WordAddr> (low byte) <WordAddr>(high byte)
N14:6 Write data DW 1 (if not used, please set to 0)
N14:7 Write data DW 1 (if not used, please set to 0)
N14:8 <WordNum> <T> <command>
N14:9 <WordAddr> (low byte) <WordAddr>(high byte)
N14:10 Write data DW 1 (if not used, please set to 0)
N14:11 Write data DW 1 (if not used, please set to 0)
N14:12 <WordNum> <T> <command>
N14:13 <WordAddr> (low byte) <WordAddr>(high byte)
N14:14 Write data DW 1 (if not used, please set to 0)
N14:15 Write data DW 1 (if not used, please set to 0)
Tab le 7. 2 0 Wr i te P LC5 ty pe
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
N7:0 <WordNum> 0 0 1 <T> <command>
N7:1 <ReplyCounter> <Status>
N7:2 Read data DW 1
N7:3 Read data DW 1
N7:4 <WordNum> 0 1 0 <T> <command>
N7:5 <ReplyCounter> <Status>
N7:6 Read data DW 1
N7:7 Read data DW 1
N7:8 <WordNum> 0 1 1 <T> <command>
N7:9 <ReplyCounter> <Status>
N7:10 Read data DW 1
N7:11 Read data DW 1
N7:12 <WordNum> 1 0 0 <T> <command>
N7:13 <ReplyCounter> <Status>
N7:14 Read data DW 1
N7:15 Read data DW 1
Table 7.21 Read PLC5 type