2023-05
10
VisuNet Control Center 6
Product Description
4.2 Program features
The VisuNet Control Center allows the user to manage all HMI systems with RM Shell 6 as well
as RM Shell 5.0 or newer from a central location. Therefore, the administrators no longer need
to enter hazardous areas or other restricted areas like clean rooms to setup or maintain a
Remote Monitor or box thin client. Instead, access to the Remote Monitors is granted from a
central location, which saves time and costs.
Via the VisuNet Control Center, connection profiles can be created for a Remote Monitor and
then transferred to other devices. Firmware updates are realized with a single click. In addition,
the user can connect to any Remote Monitor with RM Shell 6 or 5, monitor the device status
and the screen content or even take over control remotely. This simplifies support and signifi-
cantly increases the availability of the devices.
Figure 4.1
• Efficient, centralized remote configuration (e.g. device settings, remote profiles)
• Easy and simplified Maintenance (e.g. security patches and updates)
• Monitoring and remote support (e.g. secured session shadowing via own own public key
certificate)
• Optimally aligned to P+F Firmware RM Shell 6 and 5
• Mass configuration and profile copying to multiple devices
• Wizards that guide users simply through the different processes
Caution!
The program must only be used in an enterprise network that is protected against unauthorized
usage by operators or malware.
To Next Page
Loading...
