2023-05
42
VisuNet Control Center 6
Manage (Device)
Either use direct function for one device or chose the Firmware Wizard to get guided through
the process and use the function for multiple devices with the dropdown menu. Depending on
which device either the RM / BTC or the VisuNet Control Center you edited your settings you
can either download or upload them to synchronize your local data. Please note that the down-
loaded or uploaded data always overwrites the existing data.
7.3 Device Management
Figure 7.14
Update Firmware
Use the Firmware Update Wizard to get guided through the update process and update an indi-
vidual or multiple devices.
To get further information on the Wizard, see chapter 6.4.
Communication Address
Decide if your Device Name should be the same as your communication address / IP address.
You can name your device any name in VisuNet CC. The device name will not be uploaded to
the RM Shell but only be saved locally in your project.
Figure 7.15
The Device Name will appear in the navigation menu as well as in the device main screen.
Figure 7.16
To Next Page
Loading...
