2023-05
14
VisuNet Control Center 6
VisuNet CC Setup
5.1 Main Structure (User Interface)
To find all your devices in the network, use the “Scan for Remote Monitors” icon.
Figure 5.3
All online devices, Remote Monitors and Box Thin Clients are listed.
Figure 5.4
VisuNet CC’s user interface is divided into three main sections:
Figure 5.5
VisuNet CC Settings
Note
If your device is not listed, you can use the “Add Device” function and add a device manually by
stating the IP address.
1 Tabbed toolbars: In the toolbar the following tabs can be selected:
File: Click the "File" tab in the top-left corner of the VisuNet CC screen to enter the
file view.
1Options:
Select "Options" from the navigation bar to adjust VisuNet CC settings. The following
settings can be adjusted:
To Next Page
Loading...
