Pepperl+Fuchs VisuNet Control Center 6 - Profiles

VisuNet Control Center 6
Manage (Device)
2023-05
69
7.7 Profiles
The profiles group on the ribbon tool bar shows all relevant functions for setting up and using a
remote profile.
Figure 7.59
Function Description
Connect Start the profile selected from the VisuNet CC profile list stored on
an RM / BTC.
VisuNet CC must be synchronized with the RM / BTC in order for
the remote profiles shown on the profiles list to be present on the
RM / BTC.
Disconnect Close the selected active profile connection of an RM / BTC.
Edit Profile Allows editing core settings of local profiles that are stored in the
VisuNet CC project.
To change the profile on an RM / BTC after editing, use the
"upload" function.
Create Allows creating a new profile in the Control Center with its core
values.
To use the profile on an RM / BTC, use the "upload" function.
Delete Allows a profile on an RM / BTC to be deleted.
To delete the profile on an RM / BTC, use the "upload" function.