VisuNet Control Center 6
"How Tos"
2023-05
71
8.2 Connecting to an RM / BTC
Goal
Add an RM / BTC to a VisuNet CC project.
Adding an RM / BTC
1. Add RM / BTC to the list of available devices
2. Open search window by clicking "Scan for Remote Monitors".
3. Close window by clicking "OK". All RMs / BTCs that have been found will be added to the list of
devices.
Figure 8.1 Scanning for RMs / BTCs
4. Click on the RM / BTC you want to connect to in device list.
5. To initiate the connection to an RM / BTC, enter the PFAdmin Windows password that has been
set during the First Start Wizard of the RM Shell 6.
Caution!
Password security
Use strong passwords for the user roles "engineer" and "administrator" on the
RMs / BTCs to ensure a high level of security!
Note
To avoid recurring authentications, the connection password can be stored
encrypted in the Control Center project.
To Next Page
Loading...
