2023-05
12
VisuNet Control Center 6
Product Description
4.4 Installation
VisuNet CC can be installed via a standard installer. Follow the installation wizard to perform
the installation. The software can be installed on any WIndows Operationg System that sup-
ports the Microsoft .NET Framework 4.7.2.
For individual firewall settings at your service PC use the following ports:
• VisuNet CC Discovery UDP 3702 and 137
• VisuNet CC Download/Upload TCP 8023
• VisuNet CC Session Shadowing TCP 5900
• VisuNet CC Default Secure Tunnel Port TCP 22314
• Factory Reset communication Port 23314 TCP
The firewall of the device must allow "pepperl-fuchs.com" as a domain to allow the internal
update function to operate.
Tip
The firewall on either a service PC or Pepperl+Fuchs RM / BTC will be configured
automatically. During the installation the firewall rules will be activated.
To Next Page
Loading...
