VisuNet Control Center 6
Manage (Home)
2023-05
31
6.6 About
Figure 6.21
With this button you can check if any Updates for VisuNet Control Center are available. To use
this function the device needs to have Internet access. Updates can be directly installed to the
device.
Otherwise you can update the program by downloading the latest version on the Pep-
perl+Fuchs website.
Function Description
Allow upload settings Allows a user to upload configuration to an RM, import an SSL cer-
tificate to an RM, and perform a firmware update on an RM.
Allow Session Shadowing
Remote Control
Allows a user to take control of an RM while in session shadowing.
Allow Viewing of Session
Shadowing
Allows a user to view an RM via session shadowing.
Allow Editing Profiles Allows a user to create, delete, and edit connection profiles.
Allow Starting/Stopping
Profiles
Allows a user to start and stop the connection of profiles.
Allow Editing User Privi-
leges
Allows a user to access the “Edit Users” screen and add, delete,
and modify users and user groups.
Allow Local Commands Allows a user to enable or disable an RM’s keyboard, mouse, and
touchscreen. In addition the user is allowed to reboot, and shut
down the devices as well as using the Apply/Capture Wizard.
Allow Editing of Project
Structure
Allows a user to scan for RMs, manually add an RM, remove an
RM, or assign an RM to a group.
Allow Firmware Update Allows user to Update single or multiple Devices with the latest
Firmware.
Ta b l e 6 . 1
To Next Page
Loading...
