VisuNet Control Center 6
VisuNet CC Setup
2023-05
15
Figure 5.6
In the log settings you can choose which Control Center events are being loged in the log file
and where this will be stored on the local machine.
Function Description
Open/Close Timeout Specifies the time VisuNet CC waits for an answer from the RM /
BTC during establishing/closing of a connection before a timeout
occurs. Increase the timeout, when there are problems establish-
ing a connection to device.
Connection Timeout Specifies the time VisuNet CC waits for an answer from the RM /
BTC when a connection has been established before a timeout
occurs.
Refresh Cycle Timeout Specifies the time intervals in which VisuNet CC automatically
polls the connected RM / BTC for new device information.
Increase the timeout, if connections are interrupted at short
notice from time to time.
Maintenance Access Tim-
eout
Specifies the time the local operator is given to respond to the
dialog prompt before the maintenance mode is automatically
entered.
Max simultaneous Actions: Specifies the number of actions performed simultaneously.
Note: Multiple simultaneous action can cause high network traf-
fic, resulting in high latencies for other devices on the network.
To Next Page
Loading...
