2023-05
54
VisuNet Control Center 6
Manage (Device)
Figure 7.34
3. The Cleanup process might take several hours. During that time the device can be operated but
might response slowly.
4. Click "Finish". The Cleanup process runs in the background. You can follow the progress in the
Action History list. When every device Status is set to "Success", the performed action is
completed. The settings of the simultaneous actions can be reset again.
Note
If your storage after cleaning up the disk is still not sufficient for updates or
installing 3rd party software, we recommend updating your device with the
latest factory reset version >6.0 available at www.pepperl-fuchs.com. Due to
the adapted partition design of the latest update the available storage has
increased considerably.
To Next Page
Loading...
