Pepwave Surf On-The-Go User Manual

5. In the WAN IP Settings section, select the method the Surf will use to
obtain an IP address.
» Congure Manually – Choose this option
if you will use a static IP address.
» Obtain an IP Address using DHCP – Choose this option to obtain
an IP address automatically. This option is best for most users.
» Obtain an IP Address using PPPOE – Choose this
option to connect to an Internet service using PPPOE.
6. Scroll down to the AP Settings section and select Congure Manually.
7. In the AP SSID eld, enter the network name you’d like the Surf to display
when broadcasting its SSID.

Pepwave Surf On-The-Go Specifications

General

Brand	Pepwave
Model	Surf On-The-Go
Category	Network Router
Language	English