IVIS
®
Lumina XRMS Series III Hardware Manual Chapter 2 | Important Safety Instructions 7
Overloading
Facilities should be adequately wired according to local building codes.
2.8 Servicing
Refer all servicing to PerkinElmer Technical Support (see page 24). If the IVIS Lumina XRMS
Series III is damaged and requires service, unplug the instrument from the outlet and contact
PerkinElmer Technical Support. Servicing by anyone other than an authorized PerkinElmer
representative voids the warranty covering the IVIS Lumina XRMS Series III.
2.9 Other Equipment
Use of any equipment other than that recommended by this manual has not been evaluated for safety
and, therefore, is the sole responsibility of the user.
Do not modify the IVIS Lumina XRMS Series III in ANY manner by making any kind of hole or
aperture in the instrument or removing any component of the radiation shielding.
WARNING! Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock. See Components
and Specifications on page 36 for more details on the power requirements of the
equipment.
To Next Page
Loading...
