IVIS
®
Lumina XRMS Series III Hardware Manual Chapter 2 | Important Safety Instructions 3
2.2 Safety Symbols
Table 2.1 shows safety symbols that are found on the IVIS Lumina XRMS Series III and in this
manual.
2.3 Instructions
Read, Retain, and Follow Instructions
Read and understand all the safety and operating instructions before you install, operate, or perform
maintenance on the IVIS Lumina XRMS Series III. Make sure that you fully understand the
following safety instructions, warnings, and disclaimers before proceeding to the rest of the manual.
Retain the safety and operating instructions for future reference.
Follow all operating and handling instructions. Failure to follow operating or handling instructions
may void any warranty covering this product.
Heed Warnings
Abide by all warnings on the product and in the operating instructions. Failure to adhere to warnings
or safety precautions may void any warranty covering the IVIS Lumina XRMS Series III.
Table 2.1 Safety symbols
Symbol Definition
Warning: Hazardous voltage
Warning: The equipment produces X-rays when energized.
Warning (Canada): The equipment produces X-rays when energized.
WARNING! The IVIS Lumina XRMS Series III should be operated only by personnel
who have been trained in radiation safety and the operation and safety
instructions contained in this manual. PerkinElmer also recommends that
personnel who operate the equipment, or are close proximity to the equipment,
use a radiation film badge or other type of appropriate personal dosimeter
To Next Page
Loading...
Need help?
General
