IVIS
®
Lumina XRMS Series III Hardware Manual Index 85
optical density 63
optical filter wheel 42
options 80
other equipment 7
P
panels 10
photographic image unacceptable 75
power cord 6
power line surges 6
power outage
restarting the system
46
power outages 6
power overloading 7
power sources 6
R
radiation
survey for leakage
68
replace
filter
67
fuse 65–66
lamp 66
requirements
installation
57
voltage 57
restarting after power outage 46
S
safety
chemical & biological
10
electrical 8
electrical safety 8
eye hazard 9
mechanical 9
panels, cover, and modules 10
safety instructions 2–7
safety symbols
hazardous voltage
3
X-ray warning 3
X-ray warning (Canada) 3
scintillation module 39
scintillation plate 49
scintillation plate
lower position
54
upper position 52
scintillation plate
lower position
52
upper position 49
servicing 7
servicing the equipment 8
shut down procedure 55
specifications
computer
44
computer monitor 44
electrical power 57
environmental 57
fuse 57
humidity 57
imaging chamber 42
lamp 57
optics 42
temperature 57
stage curtain 48
start up 78–79
restarting after power outage 46
subject placement 54
system
cleaning
69–70
environmental requirements 44
moving with XWS-260 workstation 77–79
restarting after power outage 46
shut down 55
start up 78–79
system components
Fluorescence Module
58
X-ray system 37–39
T
temperature 57
measured unequal to demand 74
troubleshooting
camera noise
76
measured and demand unequal 74
no image produced 76
unacceptable luminescent image 75
unacceptable photographic image 75
V
ventilation requirements 57
voltage requirements 57
W
water and moisture safety 5
X
X-ray
hazard regulations
4
safety symbol 3
safety symbol (Canada) 3
system & components 37–39
system control panel 40
X-ray modality 46, 79
XWS-260 workstation 77–79
To Previous Page
Loading...
