2.3.3.2 plate::handler FLEX + Incubator
For requirements of the optional incubator see also chapter2.8.4 .
* "Working area I" is required during service visits. The depth of this area can be
reduced from 80 to 15 cm if the automation system consists only of the plate:handler
robot (no incubator) and if the entire system is rollable.
** If the space required during delivery is not available in the lab, installation can also
take place in a different room, as long as the table can be rolled to the destination lab.
2 Requirements
18 Opera Phenix Plus – Site Readiness
To Next Page
Loading...
