PerkinElmer OPERA PHENIX PLUS - Network Integration Overview

This chapter contains policies and general information about the IT infrastructure and
rules for integration of the Opera Phenix System into any network environment.
Notice
The purpose of the Opera Phenix IT Policy is to ensure the effective
protection and proper usage of the computer systems belonging to
the “Opera Phenix system”. The IT Policy will assist in maintaining
systems at operational level. Contraventions of the IT Policy could
seriously disrupt the operation of the “Opera Phenix system” and
could involve PerkinElmer support billable at the current service rate.
Notice
PerkinElmer is not responsible for problems caused by violating the
following policies. Any effort required to verify this type of problem is
billable at the current service rate and is not covered by guarantee
and/or service contract.
3.1 Network Integration
3.1.1 Overview
PerkinElmer
HCS Instrument
NIC1
192.168.1.1
NIC2
DHCP
Harmony PC
The “Opera Phenix System” is composed of:
l Opera Phenix device (cell imaging reader)
l Harmony PC (to control the Opera Phenix using the Harmony software)
Optional components (provided by the customer) may be:
l SAN / image server to store/archive images
l Office PCs (for an office installation of the Harmony software)
l Columbus Server
Upgrade components (automation upgrade):
l plate::handler robot (for automated plate handling)
l plate::works PC (running the scheduling software plate::works)
l Network switch, 1Gbit speed, provided by PerkinElmer
l USB-Ethernet adapter
3 IT Policy
28 Opera Phenix Plus – Site Readiness