2.8 Delivery Requirements
2.8.1 General
l All delivered transportation crates will be opened and unpacked by PerkinElmer
Service.
l The customer will be responsible for the on site transportation of the containers
from the receiving department right to the desired room position. For this purpose,
the customer must provide a pallet-jack or forklift device.
l If the crates would not fit through the lab entry door, the crates can be placed right
in front of the lab and the instrument will be picked up by PerkinElmer Service by
using of a special fork-lift. It must be guaranteed by the customer that the lab door
will give a clear width of 900 mm (35.43 in). The floor way to the final bench
position must be smooth and suitable for using the fork-lift.
l The remains of the wooden transportation crates will be disposed of by the
customer.
2.8.2 Opera Phenix Plus
The following transport crates will be shipped to the customer:
l Instrument Crate (wooden crate)
Dimensions (W × D × H): 176 × 84 × 136 cm (70 × 33 × 54 in)
Weight: 344 kg (759 lb)
l Accessories Crate (wooden crate)
Dimensions (W × D × H): 176 × 105 × 136 cm (70 × 42 × 54 in)
Weight: 220 kg (485 lb)
l Delivery Kit (Flight Case)
In order to perform the Opera Phenix Plus setup a special “Flight Case” on wheels
with brakes will be shipped. After setting up the instrument the responsible
service engineer will send the Delivery Kit back to PerkinElmer.
Dimensions (W × D × H): 118 × 79 × 166 cm (46 × 31 × 65 in)
Weight: 130 kg (287 lb)
l Opera Phenix Heavy Duty Lab Cart (optional, on pallet)
Dimensions (W × D × H): 155 × 105 × 104 cm (61 × 42 × 41 in)
Weight: 219 kg (483 lb)
l Pipettor Crate (optional, on pallet)
Dimensions (W × D × H): 123 × 105 × 76 cm (49 × 42 × 30 in)
Weight: 77 kg (170 lb)
2 Requirements
24 Opera Phenix Plus – Site Readiness
To Next Page
Loading...
