KENR9126 135
Troubleshooting Section
Test Step 7. Connect the Electronic
Service Tool and the ECM to another
Battery
Batteries giv e off flammable fumes which can ex-
plode.
To avoid injury or death, do not strike a match,
cause a spark, or smoke in the vicinity of a battery.
NOTICE
Do Not connect the Bypass Harness to the battery un-
til the in-line fuse has been removed from the +Battery
line.If th
e fuse is not removed before connection to the
battery a spark may result.
Note: Ref
er to Troubleshooting, “Electronic Service
Tools” for details of the bypass harness.
To Next Page
