Perle IOLAN + Rack - Page 95

89
The Menu Interface
Authentication This field defines how a user logs in. Default
is none.
None This sets authentication off.
Local This forces the incoming user to enter the
IOLAN+ login authentication password
(same password for all ports).
Host This is full authentication requiring a user ID
and password that will be checked against a
designated authentication host.
Both This provides two levels of security with
Local authentication first, then Host .
Mode This field defines whether the connection is raw
or telnet . A raw connection is a straight TCP
connection. Setting the mode to
telnet causes it
to do the
telnet negotiations with a network
connection. This should be set to
raw for RCP
and LPD printing & modem connections, and
be set to
telnet for reverse telnet connections.
Connection This field defines whether the user has access
to multiple connections or only a single
connection, and the level of control the user
has over these connections.
None IOLAN+ does not try to initiate any
connections. The user has full control and
access to all 4 sessions. This is the default.