Perle IOLAN + Rack - Page 96

90
IOLAN
+
- User and Administration Guide
Preferred IOLAN+ makes an immediate connection to
the indicated host machine and port number.
The
Host , Remote and Mode fields must be
filled in. Although the user is connected to a
designated host, the user can hot key
^] back
from this connection to the unit. This allows
a user to configure the system so that they
always log into one machine, but still have
the option of connecting to others.
Dedicated IOLAN+ makes an immediate connection to
the indicated host and port number. The
user is limited to only a single connection to
the indicated host, and can not hot key back
to the IOLAN+ menus. The
Host , Remote
and Mode fields must be set properly.
Initiated This setting is similar to the Dedicated
connection, but requires the user to enter the
return key before initiating a connection. It is
widely used for terminal/PC connections.
Host This field defines the remote host to be
connected to. Either a host name or an IP
address may be used. If a name is entered it
must be in the host table. Default is blank.
Remote Port This field defines the remote TCP port number
for IOLAN+ to connect to. Use port number 23
for
telnet and 513 for rlogin . Default is 0 .
Local Port This field defines the local TCP port for IOLAN+
to listen on. The port default to 10000 plus the
number of the port.