Persistent Systems Wave Relay MPU5 User Manual

© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
101
Configure Video Output IP Address and Port
DEVICE OPERATION: CONFIGURING VIDEO SETTINGS
1
Enter an IP address for the video in the Video Output IP field. Pick a unique IP address.
Uncheck the Factory Default box to make changes to this field. Check the Factory Default
box to use the Factory Default Video Output IP.
2
Enter a port for the video stream in the Video Output Port field. Uncheck the Factory De-
fault box to make changes to this field. Check the Factory Default box to use the Factory
Default Video Output Port.

Persistent Systems Wave Relay MPU5 Specifications

General

Brand	Persistent Systems
Model	Wave Relay MPU5
Category	Radio
Language	English