© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
103
DEVICE OPERATION: CONFIGURING VIDEO SETTINGS
Select Video Encoding Settings
1
Select a resolution from the Resolution
drop-down menu. This setting selects
the resolution at which video will be
encoded. Options are:
4
If you wish to encode audio with the
video stream, select Yes from the Audio
drop-down menu. Otherwise, select
No.
2
Select a frame rate from the Frame Rate drop-down menu. This setting selects the frame rate
at which video will be encoded.
3
Select a bit rate from the Bit Rate drop-down menu. This setting selects the bit rate at which
video will be encoded.
Note: Available frame rate and bit rate options change based on the selected resolution. If
you change resolution and the selected frame rate and bit rate settings are available for that
resolution, they will not change. If you change resolution and the selected frame rate or bit
rates settings are not available for that resolution, frame rate and bit rate will be set to the
factory default setting for that resolution.
To Next Page
Loading...
Need help?
General