Pfaff 1114

Installation and commissioning
30
8.04 Basic position of the machine drive unit
Switch on the machine.●
Press the TE/speed key twice to select the input mode.●
TE
No VAL
A 101 ON
TE
No VAL
C 798 11
TE
No VAL
C 800 ON
Select parameter “798“ by pressing the corresponding +/- key, and select service level C
(value “11“).
●
By pressing the corresponding +/- key, select parameter “800“ (rotation direction of the
motor).
By pressing the corresponding +/- key, select “ON“ (reverse direction).
●
●
+0.0
2x