Sewing
42
10.02 Standard patterns
After the manual sewing mode has been called up, the standard patterns listed below are
available. Press the corresponding function key to select the desired standard pattern. The
standard pattern selected is marked with a triangular marking opposite the respective func-
tion key. The values of the most important parameters are shown on the display and can be
changed directly with the +/- keys.
The following standard patterns are available:
Straight stitch Right shell stitches
Single zigzag Left shell stitches
Two-stitch zigzag Right blind stitch
Three-stitch zigzag Left blind stitch
Change the stitch position value by pressing the corresponding +/- key.●
+0.0
10.02.01 Straight stitch
Switch on the machine.
Call up the standard pattern for "straight stitch".
●
●
To Next Page
Loading...
