Preparation
37
9.07 Adjusting the width of the zigzag stitch
Switch on the machine.●
8.0 +0.0
Press the single zigzag key.
Alter the value for the zigzag stitch width by pressing the corresponding +/- key.
The zigzag stitch is the distance between the left and right penetration points of
the zigzag pattern.
In the standard “straight stitch“ pattern (no zigzag) the symbol for the zigzag
stitch width does not appear on the display.
●
●
Fig. 9 - 07
zigzag stitch width
zigzag stitch width
Zigzag stitch Shell stitch