Sewing
45
Further functions in the programmed seam pattern sewing mode, also see Chapter 7.10.02
Function keys:
Start backtacks on/off TE/Speed
End backtacks on/off
"Foot raised after thread trimming"
on/off
"Needle raised after sewing
stop" on/off
Thread trimming on/off
"Foot raised after sewing
stop" on/off
Sewing is carried out with the pedal functions, see Chapter 7.03 Pedals..
After the Menu key is pressed, the machine switches to the seam pattern input mode. The
selected seam pattern is adapted or a new seam pattern is created, see Chapter 10.03.01
Altering/creating seam patterns.
10.03 Sewing programmed seam patterns
After the machine has been switched on and the sewing of programmed seam patterns
has been selected with the PM key, the display for the selection of the program number is
shown. The program number of the selected seam pattern (zigzag pattern or special back-
tacks) appears on the display together with the number of the programmed penetration
points. The desired seam pattern is selected with the corresponding +/- key.
ZZ #030
4
To Next Page
Loading...
Need help?
General
