Pfaff performance 2054 User Manual

30
9. Adjustment of the height of the free motion foot
Note:
This adjustment can only be carried out when the machine is completely assembled.
Requirement:
When in free motion position, the standard presser foot must have a clearance of 5.0 mm to the needle
plate surface (fig. 22).
Check:
• Plug the machine’s mains plug into the mains.
• Switch on the machine.
• Press the „main menu“ key.
• Press the icon for utility stitches.
• Select the straight stitch.
• Press the „More opions“ key.
• Press the icon „free motion“ sewing.
• Confirm the input with the „OK“ key.
• Press and release the foot control.
• The presser foot must now be 5.0 mm above the needle plate surface.
Adjustment:
• Remove the folding cover and the housing insert as described in the manual.
• Loosen counter nut 48 with a 7 mm fork wrench (fig. 23).
• Turn threaded bolt 49 on the Bowden cable until the correct height is adjusted.
• Tighten counter nut 48.
Test:
• As described under „Check“
Note:
When in „sewing“ position the standard presser foot must rest on the needle plate surface without play when
the feed dog is lowered.

Pfaff performance 2054 Specifications

General

Brand	Pfaff
Model	performance 2054
Category	Sewing Machine
Language	English